Manual Stake Pullers - Standard or Extendable Handle
An industry favorite for manually removing tent stakes, Rainier's stake puller is a heavy-duty tool that features a broad, rounded pivot base that does less damage to the ground, and pulls stakes more efficiently than other manual stake pullers on the market. The handle is reinforced to prevent bending and the entire tool is zinc chromate plated to prevent rust. This tool was designed with a strength-to-weight ratio to reduce fatigue of tent installers, create maximum leverage, and still provide years of service for the tenting professional.
The puller is available in two versions, the standard version and the extendable handle version. The extendable handle provides an extra foot of leverage and a knurled grip for pulling difficult stakes. When the handle is collapsed, the overall length is more than a foot shorter than the original model for easier storage and transport.
Each puller comes with your choice of three, interchangeable head (or mouth) sizes to match the diameter of the stake being pulled:
- Small mouth for stakes less than 1" in diameter
- Standard mouth for 1" diameter stakes (by far the most common size in the industry)
- Large mouth for 1-1/8" and 1-1/4" diameter stakes
These “C” shaped mouths are made of a special steel, tooled and ground to a shape that allows the puller to grab the stake firmly on the back-pull, yet slide down the stake (for the next pull) as pressure is released. Replacement mouths are available, as this item will wear after long use and become less effective. The most efficient pulling action results from positioning the tool nearly upright in front of your body and pulling in short strokes toward the chest, rather than just a few long pulls. Each stroke should lift the stake approximately 4"–6" out of the ground. This ‘ratcheting’ technique ensures that stakes are being pulled straight up out of the ground, rather than applying sideways forces to the stake that waste effort.
FORCE Stake Puller
A one person gas powered unit drives a hydraulic pump exerting 2500 lbs. psi, producing 10,000 lbs. of force.
- Remove Tent Stakes with ease!
- Honda Power, 160cc Engine
- Two-stage Hydraulic Pump
- Detent Valve
- 16" Stroke
- Hardened Pulling Yoke
- 14" Never-Flat Tires
- One Person Operation
The "FORCE" stake puller has been designed by industry experts to increase your stake-pulling efficiency and save you time and money. This unique piece of equipment will reduce labor time and effort by 70–80% and will easily remove the toughest tent stake.
One person can maneuver and operate this machine with ease because of its 14" never-flat tires. The frame is constructed of high-quality, heavy duty square steel tubing and is powder coated for durability and long-life.
The powerful pump provides 3000 psi to the 2-1/2" hydraulic bore cylinder, producing a pulling force in excess of 10,000 lbs. The stake puller force can even remove stakes from asphalt without buckling the surface.
Frame Tent Jack
Eliminates the heavy strain on personnel, materials and equipment. Make installations quicker and safer.
Tent Jack 12′ reach with tripod or wheels
Jack Replacement Parts:
- Tripod base assembly
- Jack mast – Maxi tube
- Jack mast head assembly
- Jack winch,1500 lb. rated
- Winch mounting bracket 2-pc
- Winch mounting bracket retro-fit for twin tube
- Jack strap hook assembly
- Wheel kit, retrofit present jacks
It’s a ten pound aluminum mallet that strikes like a 16lb. sledge hammer. Installation crews will experience less fatigue and you will benefit from increased productivity. A mallet with 183% more strike face translates to fewer misses. The rugged polymer handle, either regular or heavy duty, means less breakage.
A pair of keder feeders makes installation of slide-in tops faster and easier, saving labor costs and reducing fabric damage. By aligning the fabric keder with the tracks in your rafters, the chance of binding, snagging or even tearing tops when pulling them into the frame is much reduced. Fits all Maxi Slide Track rafters.
This simple yet versatile fabric clamp has many uses, commanding 175-200 lbs holding power. Hang tents, drop sheets, linings, join tarps or fabric without eyelets. Helps pull tent fabric through keder track.
Two models: hand grip and equipment mount
Keder Pull Guides
Purlin Fork Head
Designed with "top ears" to make it easy to pull down, as well as push up, on purlins during installs. Fits onto any standard 2" tube.